Sample coolers/dehumidifiers Buhler TC, EGK, CV, etc.

TC-MINI coolers/dehumidifiers

• Rated power 55 kJ/h (at a dew point of 5 °C).
• Heat exchangers made of stainless steel, glass or PVDF.
• Version for high ambient temperature.
• Setting the dew point to 3,5,10 or 15°C.

Coolers/dehumidifiers TC-MIDI/TC-MIDI+/TC-MIDI X2

• Rated power 195 or 175 kJ/h, version 40 °C or 50 °C.
• Temperature indicators of cooling units.
• On request: humidity sensors, filters, analog outputs, peristaltic pumps and pumps for analyzed gases.

TC-Standard/TC-Standard+/TC-Standard X2 coolers/dehumidifiers

• Rated power 100 or 90 kJ/h, version 40 °C or 50 °C.
• Dew point stability 0.1 °C.
• Low maintenance costs due to easy access.

TC-Kit coolers/dehumidifiers

• Rated power 110 kJ/h.
• Dew point stability 0.1 °C.
• The MCD400 reading module is for separate mounting.

EGK-1/2 coolers/dehumidifiers

• The cooling capacity is 320 kJ/hour.
• Adjustable dew point at the output and alarm relay.
• Microprocessor control.

EGK-1SD coolers/dehumidifiers

• The cooling capacity is 320 kJ/hour.
• Heat exchangers made of stainless steel, glass or PVDF.
• Intelligent self-diagnosis.

EGK-2Ex coolers/dehumidifiers

• Cooling capacity is 615 kJ/hour.
• Heat exchangers with 1 or 2 channels.
• Compressor type coolers.

EGK 1 Ex2 coolers/dehumidifiers

• The cooling capacity is 320 kJ/hour.
• Dew point stability 0.1 °C.
• Self-control.

EGK-4S coolers/dehumidifiers

• The cooling capacity is 800 kJ/hour.
• Cooling up to 4 channels simultaneously.
• Heat exchangers made of stainless steel, glass or PVDF.

EGK-4 coolers/dehumidifiers

• The cooling capacity is 800 kJ/hour.
• Cooling up to 4 channels simultaneously.
• Heat exchangers made of stainless steel, glass or PVDF.
• Built-in steam traps.
• Electronic displays with temperature data display and alarm relay operation.

EGK-10 coolers/dehumidifiers

• Cooling capacity is 1450 kJ/hour.
• Heat exchangers are made of stainless steel only.
• Operating ambient temperature up to 50°C.

Coolers/dehumidifiers EGK 2-19/EGK 2-19+

• The cooling capacity is 320 kJ/hour.
• Adjustable dew point and alarm relay.
• Microprocessor control.

Gas coolers TC-Double

• Cooling capacity 270/310 kJ/h, version 40 °C/60°C.
• Dew point stability 0.1 °C.
• The heat exchanger is made of stainless steel, duran glass or PVDF.

Coolers advanced PC1

• Working pressure max. 10 bar.
• Operating temperature +350 °C.
• The material is stainless steel.

Compressors-coolers of the analyzed gas RC 1.1/ RC 1.2/ RC 1.2+

• Cooling capacity 360 kJ/hour.
• Constant dew point stability 0.1 °C.
• The heat exchanger is made of stainless steel, duran glass or PVDF.

TS-10 pre-coolers

• Designed to remove increased moisture content in front of the main coolers.
• Do not require maintenance.
• Equipped with integrated peristaltic pumps.

Pre-coolers-separators

• Centrifugal separators with mist traps for the removal of aerosols and mechanical particles from samples.
• Materials: stainless steel, PVDF.

Liquid pre-coolers

• The maximum inlet temperature is 160°C.
• Materials: stainless steel, PVDF, titanium.
• Suitable for use in hazardous areas.

Sensors and controllers of droplet moisture

• Controllers for wall mounting, DIN rail mounting and for 19" mounting.
• Instant reaction to the "slip" of moisture.
• Working pressure up to 40 Bar.
• Intrinsically safe models of sensors and controllers.

FF Humidity Sensor Controllers

• A model for a non-explosive zone.
• Model with intrinsically safe input.
• ATEX, FM, UL, CSA tolerances.

Automatic condensate drains

• Condensate is removed if there is excessive pressure in the systems.
• Materials: stainless steel or PVDF.
• Embedded and panel models.

Condensate collection tanks GL

• Material: borosilicate glass.
• Various sizes.
• Equipped with a level switch to control peristaltic pumps.

CV condensate collection tanks

• The sizes of the containers are 3, 6.5 and 10 liters.
• Excellent chemical resistance.
• Easy to clean and disassemble.
• Fill sensors (optional).

Peristaltic pumps

• Built-in coolers or individual models with protective covers and mounting accessories.
• Working tubes from Norprene have a long service life and are easy to replace.

CPsingle, CPdouble Peristaltic pumps

• Pumps with simple or double heads.
• Separate installation is possible.
• Different feed capacities.
• It is possible to install hoses made of various materials for complex applications.
• Easy replacement of hoses.